No products
W5200 Ethernet Shield
W5200 Ethernet Shield is compatible with Official Arduino Ethernet Shield and supports fast SPI and 8 sockets. Not recommended for new design End of support
HKD211.00In stockW6100 MKR-Ethernet Shield
ARM mbed compatible operation Arduino Pin-compatible Arduino MKR Series (Only MKR Etherent Shield) Ethernet (W6100 Hardwired TCP/IP chip)
HKD156.00In stockW5300-TOE-Shield
The W5300-TOE-Shield is a board that enables high-speed bus communication with the W5300 and ST's Coretex MCU.The W5300-TOE-Shield is a board that can be mounted on a Nucleo board. Individual actions cannot be performed without the Nucleo board, and only the Nucleo-F429 board is currently supported. It also supports various shield boards in the form of...
HKD156.00In StockW5500-EVB-Pico
W5500-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W5500 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5500.
HKD80.00In StockW6100-EVB-PICO2
W6100-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W6100 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W6100.
HKD88.00In StockWIZwiki-W7500P
WIZwiki-W7500P is a SoC platform board based on the W7500P chip ( ARM Cortex-M0 that integrates 128KB Flash and hardwired TCP/IP core, MAC & PHY. If you use WIZwiki-W7500P board, you can easily evaluate the W7500P and test its performance and all functions.
HKD233.00Out of stock
W55MH32
The W55MH32 is a high-security, low-power MCU featuring a powerful Cortex-M3 core with rich peripherals in iMCU series. Its provides an advanced IoT connectivity to work on consumer and industrial applications.
HKD16.90In stockW55MH32L-EVB
The W55MH32L-EVB is a high-performance evaluation board featuring the W55MH32L microcontroller, designed for industrial and IoT applications.
HKD246.00In StockW55MH32Q-EVB
The W55MH32Q-EVB is a high-performance evaluation board featuring the W55MH32Q microcontroller, designed for industrial and IoT applications.
HKD133.00In StockW6300
W6300 is a WIZnet 10/100 TOE ethernet chip that combines the high-speed ethernet performance with Dual IPv4/v6 Hardware stack. To support ethernet performance up to 90Mbps and above, it supports 150MHz system clock and QSPI interface(including 4 Data lines). W6300 supports a total SRAM size of 64KB for 8 sockets, each has 4KB TX/RX buffer by default.
HKD16.50Out of stock
HRW5500RE
Single Port RJ45 Connector with Intergrated Magnetics and LED for 10/100Base-T NIC Application
HKD6.24In StockW7500S2E-R1
W7500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client and UDP modes. The maximum baud rate of the serial port is 460,800bps. W7500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring. Price increase due to material costs.
HKD90.00In StockW6100
IPv4/IPv6,Hardwired TCP/IP w/ 802.3 Ethernet MAC and PHY, 8-sockets, Fast SPI/BUS
HKD24.10In StockW7500P
The IOP (Internet Offload Processor) W7500P is the one-chip solution which integrates an ARM Cortex-M0, 128KB Flash and hardwired TCP/IP core & PHY for various embedded application platform especially requiring ‘Internet of things’.
HKD34.40In StockNM7010B+
NM7010B+ is the network module that includes W3150A+ (TCP/IP hardwired chip), Ethernet PHY (RTL8201CP) & MAG-JACK (RJ45 with X’FMR) with other glue logics. It can be used as a component and no effort is required to interface W3150A+ and PHY chip. The NM7010B+ is an ideal option for users who want to develop their Internet enabling systems rapidly. EOL...
HKD163.00Out of stockWIZ550SR
WIZ550SR is Serial to Ethernet module, It's mounted TCP/IP chip W5500 of WIZnet and Cortex-M3-based STM32F103RCT6 of STmicro. WIZ550SR does not contain RJ45 because very small size type. WIZ550SR provides the user Interface 2.00mm Pitch Pin header.
HKD171.60In StockW5500S2E-Z1
W5500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client, UDP and Modbus modes. The maximum baud rate of the serial port is 1.152Mbps. W5500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring. Substantial Price INCREASED for MCU.
HKD140.00In Stock
W5200 Ethernet Shield
W5200 Ethernet Shield is compatible with Official Arduino Ethernet Shield and supports fast SPI and 8 sockets. Not recommended for new design End of support
HKD211.00In stockW6100 MKR-Ethernet Shield
ARM mbed compatible operation Arduino Pin-compatible Arduino MKR Series (Only MKR Etherent Shield) Ethernet (W6100 Hardwired TCP/IP chip)
HKD156.00In stockW5300-TOE-Shield
The W5300-TOE-Shield is a board that enables high-speed bus communication with the W5300 and ST's Coretex MCU.The W5300-TOE-Shield is a board that can be mounted on a Nucleo board. Individual actions cannot be performed without the Nucleo board, and only the Nucleo-F429 board is currently supported. It also supports various shield boards in the form of...
HKD156.00In StockW5500-EVB-Pico
W5500-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W5500 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5500.
HKD80.00In StockW6100-EVB-PICO2
W6100-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W6100 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W6100.
HKD88.00In StockWIZwiki-W7500P
WIZwiki-W7500P is a SoC platform board based on the W7500P chip ( ARM Cortex-M0 that integrates 128KB Flash and hardwired TCP/IP core, MAC & PHY. If you use WIZwiki-W7500P board, you can easily evaluate the W7500P and test its performance and all functions.
HKD233.00Out of stock