No products
W6100 Ethernet Shield
W6100 Ethernet Shield is based on W6100. For more information about W6100, please visit W6100 Datasheet. This Ethernet Shield can be used on boards with an Arduino Pin Header Form factor.
HKD210.60In stockioShield-K
ioShield-K is an Ethernet Shield for GR-KURUMI(Gadget Renesas KURUMI).
HKD156.00In StockW5100S-EVB-PICO2
W5100S-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W5100S – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5100S.
HKD88.00In StockWizFi Shield
WizFi Shield utilizes fully certified WizFi210 wifi module to provide your Arduino with wireless capability. SPI interface is used to allow for faster transmission speed and to free up the Arduino’s UART. All the software and hardware materials are freely available and open source.
HKD428.40In stockW5200 Ethernet Shield
W5200 Ethernet Shield is compatible with Official Arduino Ethernet Shield and supports fast SPI and 8 sockets. Not recommended for new design End of support
HKD211.00In stockW5100S-EVB-Pico
The W5100S-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 microcontroller chip and full hardwired TCP/IP controller W5100S chip. The W5100S-EVB-Pico has the same role as the Raspberry Pi Pico platform and includes W5100S, so the Ethernet function is basically included.
HKD80.00In StockioShield-L
ioShield-L is an Ethernet BoosterPack for MSP430 LaunchPad development board(MSP-EXP430G2, TI).
HKD156.00In StockW5300-TOE-Shield
The W5300-TOE-Shield is a board that enables high-speed bus communication with the W5300 and ST's Coretex MCU.The W5300-TOE-Shield is a board that can be mounted on a Nucleo board. Individual actions cannot be performed without the Nucleo board, and only the Nucleo-F429 board is currently supported. It also supports various shield boards in the form of...
HKD156.00In Stock
SP2301
The SP2301 Secure Pi Module is the latest advancement in embedded systems technology, crafted around the robust Apollo Processor from Secure Pi. Featuring a powerful Cortex-A5 core, this module is designed to deliver exceptional security, versatility, and performance, making it an ideal choice for a wide range of applications, from IoT devices to complex...
HKD118.00In StockSP2302
Secure Pi is proud to introduce the SP2302, the latest addition to its line of high-performance embedded systems. Powered by the innovative Secure Pi module SP2301, it is designed to address the complex demands of IoT applications requiring advanced security measures. With its robust features and compact design, SP2302 is poised to revolutionize the...
HKD236.00In StockW5100S-EVB-PICO2
W5100S-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W5100S – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5100S.
HKD88.00In StockW6100-EVB-PICO2
W6100-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W6100 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W6100.
HKD88.00In StockW5500-EVB-PICO2
W5500-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W5500 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5500.
HKD88.00In StockSP2302 set
Secure Pi is proud to introduce the SP2302, the latest addition to its line of high-performance embedded systems. Powered by the innovative Secure Pi module SP2301, it is designed to address the complex demands of IoT applications requiring advanced security measures. With its robust features and compact design, SP2302 is poised to revolutionize the...
HKD790.00In Stock
HRW5500RE
Single Port RJ45 Connector with Intergrated Magnetics and LED for 10/100Base-T NIC Application
HKD6.24In StockW7500S2E-R1
W7500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client and UDP modes. The maximum baud rate of the serial port is 460,800bps. W7500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring. Price increase due to material costs.
HKD90.00In StockW7500P
The IOP (Internet Offload Processor) W7500P is the one-chip solution which integrates an ARM Cortex-M0, 128KB Flash and hardwired TCP/IP core & PHY for various embedded application platform especially requiring ‘Internet of things’.
HKD34.40In StockNM7010B+
NM7010B+ is the network module that includes W3150A+ (TCP/IP hardwired chip), Ethernet PHY (RTL8201CP) & MAG-JACK (RJ45 with X’FMR) with other glue logics. It can be used as a component and no effort is required to interface W3150A+ and PHY chip. The NM7010B+ is an ideal option for users who want to develop their Internet enabling systems rapidly. EOL...
HKD163.00Out of stockW6100
IPv4/IPv6,Hardwired TCP/IP w/ 802.3 Ethernet MAC and PHY, 8-sockets, Fast SPI/BUS
HKD24.10In StockWIZ550SR
WIZ550SR is Serial to Ethernet module, It's mounted TCP/IP chip W5500 of WIZnet and Cortex-M3-based STM32F103RCT6 of STmicro. WIZ550SR does not contain RJ45 because very small size type. WIZ550SR provides the user Interface 2.00mm Pitch Pin header.
HKD171.60Out of stockW5100S
Hardwired TCP/IP w/ 802.3 Ethernet MAC and PHY, 4-sockets, Fast SPI/BUS
HKD14.90Product available with different optionsW5500S2E-Z1
W5500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client, UDP and Modbus modes. The maximum baud rate of the serial port is 1.152Mbps. W5500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring. Substantial Price INCREASED for MCU.
HKD140.00In Stock
W6100 Ethernet Shield
W6100 Ethernet Shield is based on W6100. For more information about W6100, please visit W6100 Datasheet. This Ethernet Shield can be used on boards with an Arduino Pin Header Form factor.
HKD210.60In stockioShield-K
ioShield-K is an Ethernet Shield for GR-KURUMI(Gadget Renesas KURUMI).
HKD156.00In StockW5100S-EVB-PICO2
W5100S-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W5100S – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5100S.
HKD88.00In StockWizFi Shield
WizFi Shield utilizes fully certified WizFi210 wifi module to provide your Arduino with wireless capability. SPI interface is used to allow for faster transmission speed and to free up the Arduino’s UART. All the software and hardware materials are freely available and open source.
HKD428.40In stockW5200 Ethernet Shield
W5200 Ethernet Shield is compatible with Official Arduino Ethernet Shield and supports fast SPI and 8 sockets. Not recommended for new design End of support
HKD211.00In stockW5100S-EVB-Pico
The W5100S-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 microcontroller chip and full hardwired TCP/IP controller W5100S chip. The W5100S-EVB-Pico has the same role as the Raspberry Pi Pico platform and includes W5100S, so the Ethernet function is basically included.
HKD80.00In StockioShield-L
ioShield-L is an Ethernet BoosterPack for MSP430 LaunchPad development board(MSP-EXP430G2, TI).
HKD156.00In StockW5300-TOE-Shield
The W5300-TOE-Shield is a board that enables high-speed bus communication with the W5300 and ST's Coretex MCU.The W5300-TOE-Shield is a board that can be mounted on a Nucleo board. Individual actions cannot be performed without the Nucleo board, and only the Nucleo-F429 board is currently supported. It also supports various shield boards in the form of...
HKD156.00In Stock