No products
WizFi360-EVB-Pico
WizFi360-EVB-Pico is based on Raspberry Pi RP2040 and adds Wi-Fi connectivity using WizFi360. It is pin compatible with Raspberry Pi Pico board and can be used for IoT Solution development.
HKD57.00In StockWIZnet Pico PoE
It combines with the W5500, W5100S, and W6100 Io Module to provide Ethernet as well as a separate power supply. It can supply up to 8W Raspberry Pi Pico Mountable Ethernet W5100S, W5500, W6100 IO Module Mountable
HKD228.00Out of stockW6100 MKR-Ethernet Shield
ARM mbed compatible operation Arduino Pin-compatible Arduino MKR Series (Only MKR Etherent Shield) Ethernet (W6100 Hardwired TCP/IP chip)
HKD156.00In stockW5100S-EVB-PICO2
W5100S-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W5100S – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5100S.
HKD75.00 HKD88.00Reduced price!W5500-EVB-Pico
W5500-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W5500 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5500.
HKD80.00In StockW5200 Ethernet Shield
W5200 Ethernet Shield is compatible with Official Arduino Ethernet Shield and supports fast SPI and 8 sockets. Not recommended for new design End of support
HKD211.00In stockWIZwiki-W7500
WIZwiki-W7500 is a WIZwiki platform board based on the W7500, the ARM Cortex-M0 that integrates 128KB Flash and hardwired TCP/IP core. If you use WIZwiki-W7500 board, you can easily evaluate the W7500 and test its performance and all functions.
HKD233.00In stockW5500 Ethernet Shield
W5500 Ethernet shield is designed using the WIZnet W5500 chip. Please click the link for the further information about W5500. It supports both 3.3V & 5V. This Ethernet Shield is compatible with Arduino and ARM mbed Platform.
HKD179.00In stock
W5100S-EVB-PICO2
W5100S-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W5100S – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5100S.
HKD75.00 HKD88.00Reduced price!W6100-EVB-PICO2
W6100-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W6100 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W6100.
HKD75.00 HKD88.00Reduced price!W5500-EVB-PICO2
W5500-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W5500 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5500.
HKD75.00 HKD88.00Reduced price!SP2302 set
Secure Pi is proud to introduce the SP2302, the latest addition to its line of high-performance embedded systems. Powered by the innovative Secure Pi module SP2301, it is designed to address the complex demands of IoT applications requiring advanced security measures. With its robust features and compact design, SP2302 is poised to revolutionize the...
HKD790.00In StockW55RP20-EVB-PICO
W5500-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W5500 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5500.
HKD68.00 HKD80.00Reduced price!W55RP20
Our latest ioNIC integrates serial interfaces with Ethernet connectivity, offering tailor-made networking solutions for you. Experience optimized performance for industry-specific applications with support for various network protocols, enhanced SSL security features and cloud SDKs!
HRW5500RE
Single Port RJ45 Connector with Intergrated Magnetics and LED for 10/100Base-T NIC Application
HKD6.24In StockW7500S2E-R1
W7500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client and UDP modes. The maximum baud rate of the serial port is 460,800bps. W7500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring. Price increase due to material costs.
HKD90.00Out of stockW7500P
The IOP (Internet Offload Processor) W7500P is the one-chip solution which integrates an ARM Cortex-M0, 128KB Flash and hardwired TCP/IP core & PHY for various embedded application platform especially requiring ‘Internet of things’.
HKD34.40In StockNM7010B+
NM7010B+ is the network module that includes W3150A+ (TCP/IP hardwired chip), Ethernet PHY (RTL8201CP) & MAG-JACK (RJ45 with X’FMR) with other glue logics. It can be used as a component and no effort is required to interface W3150A+ and PHY chip. The NM7010B+ is an ideal option for users who want to develop their Internet enabling systems rapidly. EOL...
HKD163.00Out of stockW6100
IPv4/IPv6,Hardwired TCP/IP w/ 802.3 Ethernet MAC and PHY, 8-sockets, Fast SPI/BUS
HKD24.10In StockWIZ550SR
WIZ550SR is Serial to Ethernet module, It's mounted TCP/IP chip W5500 of WIZnet and Cortex-M3-based STM32F103RCT6 of STmicro. WIZ550SR does not contain RJ45 because very small size type. WIZ550SR provides the user Interface 2.00mm Pitch Pin header.
HKD171.60Out of stockW5100S
Hardwired TCP/IP w/ 802.3 Ethernet MAC and PHY, 4-sockets, Fast SPI/BUS
HKD14.90Product available with different optionsW5500S2E-Z1
W5500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client, UDP and Modbus modes. The maximum baud rate of the serial port is 1.152Mbps. W5500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring. Substantial Price INCREASED for MCU.
HKD140.00In Stock
W5100S-EVB-PICO2
W5100S-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W5100S – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5100S.
HKD75.00 HKD88.00Reduced price!W6100-EVB-PICO2
W6100-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W6100 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W6100.
HKD75.00 HKD88.00Reduced price!W5500-EVB-PICO2
W5500-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W5500 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5500.
HKD75.00 HKD88.00Reduced price!W55RP20-EVB-PICO
W5500-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W5500 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5500.
HKD68.00 HKD80.00Reduced price!
WizFi360-EVB-Pico
WizFi360-EVB-Pico is based on Raspberry Pi RP2040 and adds Wi-Fi connectivity using WizFi360. It is pin compatible with Raspberry Pi Pico board and can be used for IoT Solution development.
HKD57.00In StockWIZnet Pico PoE
It combines with the W5500, W5100S, and W6100 Io Module to provide Ethernet as well as a separate power supply. It can supply up to 8W Raspberry Pi Pico Mountable Ethernet W5100S, W5500, W6100 IO Module Mountable
HKD228.00Out of stockW6100 MKR-Ethernet Shield
ARM mbed compatible operation Arduino Pin-compatible Arduino MKR Series (Only MKR Etherent Shield) Ethernet (W6100 Hardwired TCP/IP chip)
HKD156.00In stockW5100S-EVB-PICO2
W5100S-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W5100S – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5100S.
HKD75.00 HKD88.00Reduced price!W5500-EVB-Pico
W5500-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W5500 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5500.
HKD80.00In StockW5200 Ethernet Shield
W5200 Ethernet Shield is compatible with Official Arduino Ethernet Shield and supports fast SPI and 8 sockets. Not recommended for new design End of support
HKD211.00In stockWIZwiki-W7500
WIZwiki-W7500 is a WIZwiki platform board based on the W7500, the ARM Cortex-M0 that integrates 128KB Flash and hardwired TCP/IP core. If you use WIZwiki-W7500 board, you can easily evaluate the W7500 and test its performance and all functions.
HKD233.00In stockW5500 Ethernet Shield
W5500 Ethernet shield is designed using the WIZnet W5500 chip. Please click the link for the further information about W5500. It supports both 3.3V & 5V. This Ethernet Shield is compatible with Arduino and ARM mbed Platform.
HKD179.00In stock