ioShield-L is an Ethernet BoosterPack for MSP430 LaunchPad development board(MSP-EXP430G2, TI).
ioShield-K is an Ethernet Shield for GR-KURUMI(Gadget Renesas KURUMI).
W5500 Ethernet shield is designed using the WIZnet W5500 chip. Please click the link for the further information about W5500. It supports both 3.3V & 5V. This Ethernet Shield is compatible with Arduino and ARM mbed Platform.
ARM mbed compatible operation Arduino Pin-compatible Arduino MKR Series (Only MKR Etherent Shield) Ethernet (W6100 Hardwired TCP/IP chip)
WIZwiki-W7500 is a WIZwiki platform board based on the W7500, the ARM Cortex-M0 that integrates 128KB Flash and hardwired TCP/IP core. If you use WIZwiki-W7500 board, you can easily evaluate the W7500 and test its performance and all functions.
W5100S Ethernet shield is designed using the WIZnet W5100S chip.
WizFi Shield utilizes fully certified WizFi210 wifi module to provide your Arduino with wireless capability. SPI interface is used to allow for faster transmission speed and to free up the Arduino’s UART. All the software and hardware materials are freely available and open source.
W5200 Ethernet Shield is compatible with Official Arduino Ethernet Shield and supports fast SPI and 8 sockets. Not recommended for new design End of support
The SP2301 Secure Pi Module is the latest advancement in embedded systems technology, crafted around the robust Apollo Processor from Secure Pi. Featuring a powerful Cortex-A5 core, this module is designed to deliver exceptional security, versatility, and performance, making it an ideal choice for a wide range of applications, from IoT devices to complex...
Secure Pi is proud to introduce the SP2302, the latest addition to its line of high-performance embedded systems. Powered by the innovative Secure Pi module SP2301, it is designed to address the complex demands of IoT applications requiring advanced security measures. With its robust features and compact design, SP2302 is poised to revolutionize the...
W5100S-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W5100S – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5100S.
W6100-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W6100 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W6100.
W5500-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W5500 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5500.
Secure Pi is proud to introduce the SP2302, the latest addition to its line of high-performance embedded systems. Powered by the innovative Secure Pi module SP2301, it is designed to address the complex demands of IoT applications requiring advanced security measures. With its robust features and compact design, SP2302 is poised to revolutionize the...
Single Port RJ45 Connector with Intergrated Magnetics and LED for 10/100Base-T NIC Application
W7500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client and UDP modes. The maximum baud rate of the serial port is 460,800bps. W7500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring. Price increase due to material costs.
The IOP (Internet Offload Processor) W7500P is the one-chip solution which integrates an ARM Cortex-M0, 128KB Flash and hardwired TCP/IP core & PHY for various embedded application platform especially requiring ‘Internet of things’.
NM7010B+ is the network module that includes W3150A+ (TCP/IP hardwired chip), Ethernet PHY (RTL8201CP) & MAG-JACK (RJ45 with X’FMR) with other glue logics. It can be used as a component and no effort is required to interface W3150A+ and PHY chip. The NM7010B+ is an ideal option for users who want to develop their Internet enabling systems rapidly. EOL...
IPv4/IPv6,Hardwired TCP/IP w/ 802.3 Ethernet MAC and PHY, 8-sockets, Fast SPI/BUS
W5500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client, UDP and Modbus modes. The maximum baud rate of the serial port is 1.152Mbps. W5500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring. Substantial Price INCREASED for MCU.
W5100S-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W5100S – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5100S.
W6100-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W6100 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W6100.
ioShield-L is an Ethernet BoosterPack for MSP430 LaunchPad development board(MSP-EXP430G2, TI).
ioShield-K is an Ethernet Shield for GR-KURUMI(Gadget Renesas KURUMI).
W5500 Ethernet shield is designed using the WIZnet W5500 chip. Please click the link for the further information about W5500. It supports both 3.3V & 5V. This Ethernet Shield is compatible with Arduino and ARM mbed Platform.
ARM mbed compatible operation Arduino Pin-compatible Arduino MKR Series (Only MKR Etherent Shield) Ethernet (W6100 Hardwired TCP/IP chip)
WIZwiki-W7500 is a WIZwiki platform board based on the W7500, the ARM Cortex-M0 that integrates 128KB Flash and hardwired TCP/IP core. If you use WIZwiki-W7500 board, you can easily evaluate the W7500 and test its performance and all functions.
W5100S Ethernet shield is designed using the WIZnet W5100S chip.
WizFi Shield utilizes fully certified WizFi210 wifi module to provide your Arduino with wireless capability. SPI interface is used to allow for faster transmission speed and to free up the Arduino’s UART. All the software and hardware materials are freely available and open source.
W5200 Ethernet Shield is compatible with Official Arduino Ethernet Shield and supports fast SPI and 8 sockets. Not recommended for new design End of support